Official Fortec Star Satellite Distributor for  North America USA Mexico & Canada

WS International is a proud distributor of Fortec Star products in North America ~ Marietta, GA USA

Home Uplink Services Warranty / Terms Training Videos Contact Us

FTA Receivers
Dish Antennas
Ku Band LNB / LNBF
HH DiSEqC Motor
Switches
LNBF Bracket
Signal Meters
 
Dealer Login
Become a  Dealer
Training Videos

 

WS24 Multiple LNB Bracket

 

 

<Frequently Asked Questions between our WS24 bracket>

 

Download Users Manual

 

Why install multiple satellite dishes when you can install a WS24 multiple LNB bracket?  Easy to install.  Works in conjunction with most existing dish clamps.  Easy to install.  Superior quality.  Very sturdy.  Light weight.  Minimum 4-degrees. 

 

Great to use for Spiritcast Christian satellite system to view the Adventist channels from AMC 4 and Christian stations from Galaxy 25 or to view Al-Karma, CTV, and all Arabic Free To Air channels from Galaxy 25 and Aghapy from Galaxy 26 with out needing to install a second

satellite dish or motor.

 

Want to watch Galaxy 25 and Galaxy 26 or Galaxy 25 and AMC 4 on more than one TV?  Click Here

 

Recommended to be used with the WS9036 satellite dish

Galaxy 25 & Galaxy 26 | Christian TV

Multiple LNB Clamp | Galaxy 25 & Galaxy 26

AMC4 & Galaxy 25 on 1 dish

Galaxy 25 & Galaxy 26

This bracket stands still and does not rotate.  To set your polarization, you can turn the LNB to fine tune each individual LNB manually for optimum reception & not just an average polarity between two different satellites.

AMC4 & Galaxy 25




AMC4 & Galaxy 25 on one dish

WS24 LNB Bracket | Galaxy 25 & AMC 4

WS International LNB Bracket




Multiple LNB Clamp

2 LNB Holder

Multi LNB Holder




 

 

 

Adjustable to obtain maximum signal from a secondary satellite

 

 

Works with satellites that are located as little as 4 degrees apart

 

 

Full flexibility of rotation to obtain maximum signal

 

 

LNB can be easily adjusted to slide in or out to adjust for focal point

 

 

 

Two of the most common question we are asked is this:

 

1.  How come a standard LNB with flange works with this bracket, when with other brackets a special flangeless LNB similar to the TechSAT TRACKER II Mini  must be used to reach 4-degrees?

While other brackets & mono blocks are strait,  the WS24 bracket has a slightly curved guide rail that focuses the second LNB at exactly 4 degrees of the primary LNB once it's installed at the closes position to the primary LNB.  Because of this slight curve, the LNB's do not need to be as close to each other as they would on a strait bracket or mono block.    Please see pictures below:

 

As a service to installers and customers alike, instead of manufacturing our bracket to only work with a smaller flangeless LNB like the TechSAT TRACKER II Mini, we decided to work on manufacturing a bracket that would work with any LNB.  Want to know another benefit of the WS24 bracket?  See the second most common questions asked by people below.

2.  If the WS24 bracket does not rotate, how can I set the polarization for the LNB?

To answer this question, I actually have to point out another benefit of the WS24 bracket Vs. other brackets and mono-blocks.  You see, each satellite has a polarization of it's own.  In order to receive optimum signal from a satellite, you have to align and adjust the LNB to the correct polarization to match the polarity of the signal that is broadcasting.    While installing a multiple LNB system, and using a mono-block or a bracket that rotates to adjust the polarization, it actually gives you an average polarity adjustment (you basically take the polarity angle of both satellites and divide it by two.  This gives you the median of the two and you adjust your bracket to that polarity.  Example: 1 satellite has a 15 degrees polarity and the other has a 20 degrees, you would set your bracket to 17.5 polarization.) which means you will not receive as high of a signal as you should on either satellite because neither LNB is polarized properly for the particular satellite that the signal is broadcasting from. 

On the other hand, the WS24 bracket allows you to rotate the actual LNB to the actual polarization of each individual satellite in order to fine tune each satellite individually with the LNB to allow reception of optimum signal from both satellites.  Please see picture below:

Click to enlarge

 

Want to know yet another benefit?

Since you can use a LNB with flange on the bracket, you can even get your favorite programming from two satellites that are 4 degrees apart on any number of receivers using a single dish system.  That's right!  You can use 2 dual LNB's and a multi-switch of your choice to wire up many receivers. 

 

 

Will the satellite dish arm support 2 dual LNB's?  If you use the WS9036 it will.  The dish comes with supporting arms that keeps the LNB arm from wobbling. 

4-degree LNB Bracket Holder LNB Holder for 4-degree satellite seperation Multiple LNB Bracket Direct To Home Satellite Dish with Multi LNB Bracket Multi LNB Holder for Ku band 90cm Satellite Dish multiple lnb holder multiple lnbf clamp for ku band offset satellite dish ku lnb holder muliple satellite lnbf clamp for ku band and free to air satellites lnb mono block