|
| |
|
 |
Fortec Star
MercuryII
  
| MERCURY
II is a powerful satellite
receiver ideal for satellite
enthusiast. This new
model has component out.
The receiver has an
easy-to-use Menu, yet is
feature-rich. MERCURY II
comes with a comprehensive
Power Scan for blind
searching satellites. Users
can back up their channel
list before upgrading the
software, and then restore
the channel list, all from
within the receiver’s own
menu. The front panel has 8
buttons allowing complete
control of the receiver’s
functions without the use of
the remote. The back panel
has all the connection
options you would need, with
RCA composite jacks,
component jacks (Y,Pb,Pr),
and an S-video connection.
|
|
|
|
This receiver is fully MPEG2/DVB compliant, and
supports multi-languages. |
|
Free-to-air Digital
Satellite Receiver
Program up to 6,000 channels
& 150 satellites
Flexible Power Scan controls for Blind Searches
|
Features
- Channel Back-up and Channel recovery
function
- 8-button Menu Control on the front panel
- Component video (Y,Pb,Pr) and S-Video
connections
- 3 RCA connections (1 Video, 2 Audio L/R)
- POWER Scan (blind search) with
complete parameter control
- One-button quick start Power Scan on the
remote
- One-button jump to Channel Edit function
- Dolby Digital 5.1 audio
pass-through (optical)
- 100 programmable satellites and 6,000
programmable channels
- Timer function for Sleep / Wake Up / VCR
Record and Channel Reminder
- Fully MPEG 2 / DVB compliant, MCPC/SCPC,
C/KU reception
- 1 LNB input with IF loop through for 2nd
receiver
- Manual PID scan function
- DiSEqC 1.2 and
USALS supported
- Picture-In-Graphics function
- Multi-Picture (4,9, 13 or 16 pictures)
function
- ZOOM In/Out
- Electronic Program Guide
- Multi language menu
- 8 favorite channel group selection and
parental lock
- Close Caption Supported
- Data transfer: receiver-to-receiver or
PC-to-receiver
|
IF / Tuner
|
|
Input Frequency |
950 MHz to 2150 MHz |
|
Input Signal Level |
-30 to -65dBm |
|
Input Impedance |
75 ohm nominal |
|
Input Connector |
F-type, IEC 169-24,
Female |
|
FEC Decoder |
Convolution Code Rate
l/2, 2/3, 3/4,
5/6 and 7/8 with
Constraint Length K=7 |
|
Demodulation |
QPSK |
|
Symbol rate |
1-45 Ms/s SCPC/MCPC |
|
IF Frequency
|
Zero IF |
|
LNB Power &
Polarization |
V13 / H18, 500mA MAX.
overload protection |
|
DiSEqC Control |
DiSEqC. 1.0, 1.1 /
DiSEqC 1.2 Compatible |
|
Positioner |
USALS compatible
|
Memory
|
|
Processor |
NEC 61114 |
|
Flash Memory |
2 Mbytes |
|
SDRAM |
16 Mbytes |
|
Satellite Capacity |
100 |
|
Channel Capacity |
6,000 |
Audio / Video
Decoding
|
|
Video Decoder |
MPEG-2 MP@ML (ISO/IEC
13818-2) |
|
Input Rate |
60Mbit/s Max |
|
Video Resolution |
720 x 480(NTSC) |
|
Aspect Ratio |
4:3, 16:9 (Letter
Box) |
|
Audio Decoder |
MPEG Layer I &II
|
|
Audio Mode |
Mono L/R, Dual
Channel, Joint Stereo, Stereo |
|
Audio Sampling
Frequency |
32, 44.1, 48 KHz |
Audio /
Video Output
|
|
Video |
RCA composite,
component (Y,Pb,Pr), S-Video |
|
Audio R/L |
RCA/Cinch Volume &
Mute Control |
|
S/PDIF |
Digital Audio Output
DOLBY DIGITAL 5.1
Pass-through |
|
Serial Data
Interface |
|
Connector Type |
9 Pin D-Sub (male) |
|
Signal |
RS-232C, Max.
115200Bps |
Power Supply
|
|
Supply Voltage
|
100VAC ~ 120VAC
60Hz(SMPS) |
|
Power Consumption |
Max. 30W |
General
|
|
Weight |
Approx. 2.52 Kg |
|
Dimensions |
300(W) x 210(D) x
60(H)mm |
|
|
|
|
|
