Official Fortec Star Satellite Distributor for  North America USA Mexico & Canada

WS International is a proud distributor of Fortec Star products in North America ~ Marietta, GA USA

Home Uplink Services Warranty / Terms Refrences Contact Us

FTA Receivers
Dish Antennas
Ku Band LNB / LNBF
HH DiSEqC Motor
Switches
LNBF Bracket
Signal Meters
Basic Install Tools
 
Dealer Login
Become a  Dealer
Training Videos

 

All software on this site is offered "as is" and without guarantee.  This software is for experienced users only.  If you don't have the ability to load this software or if you feel unsure of your abilities, DO NOT use this software.  WS International is in no way responsible for the use or mis-use of this software.  Any repairs required because of your use or mis-use of this software will be charged at normal bench repair rates and normal replacement parts cost.  ***USE THESE SOFTWARES AT YOUR OWN RISK***

Traxis & Trimax Receivers use RS232PC for PC to receiver.....or RS232CL for receiver to receiver

The majority of files you will find here are "self extracting".  This means you need to download them to your PC and double click on them.  This will "self extract" the files you need to use.

 

Traxis DBS2500 & 1500

WS International is not responsible for problems caused by mis-use of these softwares.

The COM tool Software  you will need this to load any of the software below Click Here to Download
The COM tool Instructions  read this carefully Click Here to Download

Software (10/26/2004)

This software is satellite name changes.  This software serves no other purpose.  

Click Here to Download
Loader Software - latest loader software (installs into your receiver) (instructions are included)
  How to check the receiver loader version  
  • Menu->Accessory->System Information
Click Here to Download
 

Software (12/28/2004)

This software fixes the flashing menus.  This software serves no other purpose.  

Click Here to Download

 

Traxis DBS4500 software
WS International is not responsible for problems caused by mis-use of these softwares.

The COM tool Software, Instructions, latest software (July 7, 2005) (improved video & audio) Click Here to Download
Transponder Manager Click Here to Download

 

Traxis DBS5500CI software
WS International is not responsible for problems caused by mis-use of these softwares.

The COM tool Software, Instructions, latest software (July 7, 2005) Click Here to Download
Transponder Manager Click Here to Download

 

Trimax T-100 software

WS International is not responsible for problems caused by mis-use of these softwares.

Download Tool Ver. 4.5C (September 19, 2005) Click Here to Download
fixed audio memory bug Click Here to Download

 

Fortec Star Lifetime Ultra Software

WS International is not responsible for problems caused by mis-use of these softwares.

Uploader - v.3.31 ( August 08, 2004)       

Click  Here to Download

The Uploader is needed for transferring the firmware from your PC to your receiver.
(Intended for use with Windows XP. Female-to-female 9-pin straight through serial cable needed.)

STB Editor 1.85 ( June 17, 2004)     

Click Here to Download

STB Editor is used for editing channel and satellite information. Only compatible with software 2.39 or higher. (Channels must have been originally downloaded to the receiver with software 2.39 or higher.)
- Make sure the STB Type is set to Type 2, i.e., Options->STB Setting->Type 2.
(Intended for use with Windows XP. Female-to-female 9-pin straight through serial cable needed.)
Firmware - v.2.72NTSC  ( May 19, 2005)       

Click Here to Download

For NTSC TV systems (used in North America).
Perform a Factory Setting (restore defaults) before and after downloading software to your receiver. This ensures that the new software performs correctly.
Updates:
- Corrects a spelling mistake in the Italian language menu.

 

Foretec Star Lifetime Classic Software

WS International is not responsible for problems caused by mis-use of these softwares.

Uploader ( October 13, 2005)     

Click Here to Download

The Uploader is needed for transferring the firmware from your PC to your receiver.
(Intended for use with Windows XP. Female-to-female 9-pin NULL modem cable needed.)